Road Science

Mining Chemicals
Road Science Division
     Liquid Anti-Strips
     Emulsifiers
     Patching & Cold Mix
     Solvents
     Release Agents
     Odor Neutralizers
Fertilizer Chemicals
Nitrogen Additives
Industrial Minerals
Water Treatment
Contract Manufacturing


ArrMaz recently completed an asset
purchase of Road Science, the leading
technology and pavement services
company for the road paving industry.
This acquisition brings ArrMaz
a focus that is on Preservation &
Maintenance, Recycling, and Binder
Technologies.

You can read about this
acquisition <here>

Liquid Anti-Strips

We are the leading manufacturer of liquid anti-strips in North America. Our AD-here® line of products improves adhesion between asphalt cement and aggregate, improving the performance of asphalt pavements in terms of reduced pavement rutting and moisture induced damage. These products can be added directly to liquid asphalt at refineries or terminals or at hot mix plants. If odor is a concern, we make a line of products specifically formulated to reduce or eliminate odors caused by adding anti-strip to hot asphalt. We have an AMRL Laboratory with SuperPave capability that can test mix designs and select the right product for your application.

For more information about the effect of liquid anti-strips on asphalt binders, please read our paper given by Ray Gore, ARR-MAZ Technical Manager at the 2003 Peterson Asphalt Conference in Laramie, Wyoming: Effect of Amine-Based Anti-Strip Additives on the Performance Grade of Asphalt Binders (PDF)

Liquid Anti-Strips vs. Hydrated Lime

Liquid anti-strips or hydrated lime can do an equivalent job of preventing asphalt stripping, but liquid anti-strips are far easier and less costly to use. Below is a comparison of liquid versus a wet slurry lime system at a typical hot mix asphalt plant:

Liquid Lime
Additive Cost Moderate 1.3 to 3 times Liquid
Captial Cost Less than $10,000 $100,000 or more
Throughput No Impact Reduced
Complexity One Step Multiple Steps
Regulatory Approval 20 States 10 States

For a comparison of the performance of liquid anti-strip additives versus hydrated lime, please read our technical paper "A Comparison of Liquid Antistrip Additives and Hydrated Lime Using AASHTO T-283" (PDF)

Product Summary

Additive Applications
Dosage
By weight of asphalt (%)
Outstanding Characteristics
AD-here® LOF 65-00
AD-here® LOF 65-00 LS
AD-here® LoVisk
Hot Mix
Cold Mix
Surface Treatments
0.25 - 0.75 Low odor
Very effective with a wide range of aggregate geology.
DOT Non-regulated
AD-here® 66-01
AD-here® 66-01 LS
AD-here® 65-50
Hot Mix 0.25 - 1.0 Mild odor
Very effective with a wide range of aggregates.
DOT Non-regulated
AD-here® HP PLUS Hot Mix 0.2 - 0.75 High performance for a wide range of aggregate geology
AD-here® LA-2
AD-here® 62-40
AD-here® 1500
AD-here®
Hot Mix 0.5 - 1.0 Low viscosity
AD-here® SL
AD-here® 67-00
Hot Mix 0.5 - 1.0 Low Cost
AD-here® CB Cutback 0.5 - 1.0  
AD-here® 69-00 Cutback 0.5 - 1.0 Very effective for limestone
AD-here® 260L Cutback 0.5 - 1.0 Very liquid product designed for limestone
ACRA 500 Cutback/Hot Mix 0.5 - 1.0 General Purpose
SC-901 Hot Mix & Adhesion
Promotor for Emulsions &
Coal Tar Additive
0.25 - 0.75 Specialty